Car Racks

The EVOC TAILGATE PAD is our pickup pad for safe bike transport on your pickup-truck for up to 6 bikes. It combines secure bike fixation and tailboard damage protection in one piece. Made from durable 600 weight Denier, we added a polyurethane coating to make it resistant for the weather that you'll inevitably encounter while you're out shredding. The updated Tailgate pad is equipped with molded foam separations blocks and straps to keep your toys from touching. We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame. Features - Padded pickup tailgate protection - Ideal for shuttling bikes - particularly MTBs - Quick access to tailgate release handle - Fold-Away flap for rear camera (Olive/Black and Black/Olive only) Specifications - Weight: 1850 g (Size M/L), 2300 g (Size XL) - Material: P 600/D PU coated, Tarpaulin - Black/Olive & Olive/Black Sizes: M/L- 136 x 85 x 2 cm , XL 160 x 100 x 2 cm - Colors: Black/White, Black/Olive, Olive/Black Sizes Two sizes are available (M/L & L/XL). Use the M/L for trucks like the Toyota Tacoma, Nissan Frontier, Chevrolet Canyon, Ford Ranger and other compact trucks. Use the L/XL for full-size trucks like the Toyota Tundra, Nissan Titan, Chevrolet Silverado, Ford-F150, Dodge Ram, etc.

- Adapts female specific and full suspension frames to be easily hung on car rack carriers - Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit - Makes transporting an unconventional frame by car rack much easier - Extends from 21.5" to 31" eye to eye

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

- Hitch mount rack made to fit a 2-inch trailer hitch. - Vehicle must have a Class III or IV 2” hitch to use this product. - Tie Down cradles and straps take great care in individually securing your bicycles while protecting them from damage. - Convenient and compact design, folds easily for storage when not in use. - Sturdy steel construction with a weight limit of up to 80lbs for the 2-Bike Rack, 110lbs for the 3-Bike Rack, 140lbs for the 4-Bike Rack, and 170lbs for the 5-Bike Rack. - Minor assembly required, tools for assembly included with purchase. - Never use on trailers, RV’s, hitch adapters, or front of vehicle.

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.

- Powdercoated steel body with 9mm skewer & hole in handle for padlock

- Rigid 6061-aluminum body with 9mm skewer

- Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport - Padding is cut-resistant, water resistant and UV-stable - Non-slip protection (padded) - Quick-access tailgate release - Soft lining on the truck side of the pad, won't damage paint - Size: full-size truck (XL) or mid-size truck (ML) - Specifically designed for pickup trucks with curved tailgates - ML, Fits tailgates 130cm/50'' wide - XL, Fits tailgates 160cm/60'' wide

Designed for safe transport of up to two bikes on your pickup. Securely mount your bikes while protecting your tailgate from damage. Ideal for MTBs Specifications 770g, 83 x 57 x 2cm We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame.

The TAILGATE PAD DUO is a solution for safe pickup-truck bike transport: it fixes your bikes safely and protects your truck´s tailgate from damage. - Allows the secure transport of two bikes - Improved padding to protect the frame - Needs to be fastened to both sides of the tailgate door

12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy. Product Details: - Easy to reach low profile height position makes it easy to rack out and reach gear - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze - Best-in-class, maximum on-road rating of 300 lbs. - Maximum off-road rating of 180 lbs. - Built to last, with engineered aluminum construction and durable powder-coat finish - Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple - T-slot attachments make adding gear mounts and accessories fast and easy - Designed and tested for all common truck beds - Integrated SKS (Same Key System) locks the rack system to the truck bed - Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles Product Specs: - Weight: 8.01 lbs - Dimensions: L 5.50in x W 4.25in x H 7.00in - Some assembly required, 30 minute install

Now the entire posse only needs to mount up on one vehicle. The BigStack lets you carry up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. Folds down for better aerodynamics when not in use. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds down when not in use for better aerodynamics and easier access to your garage - Universal built-in hardware fits round, square, factory and aerodynamic crossbars right out of the box. Optimized for aerodynamic bars. - Top-of-the-line hull guard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - AnchorHead tie down feature makes it easy to manage straps with multiple kayaks - Heavy-Duty Straps and Bow and Stern Tie-Downs included (HoodAnchor, sold separately, is required for vehicles with no attachment points for Bow and Stern Tie-Downs) - Premium heavy-duty straps with coated metal buckles protect boat and vehicle - Great for carrying multiple whitewater boats - Lockable with SKS Lock Cores (sold separately) - Minimum crossbar spreads of 24" or more Product Specs: - Weight: 7.20 lbs. - Dimensions: L 6.00 in x W 5.00 in x H 22.00 in - Minimum Crossbar Spread 24.00in - Limited Lifetime Warranty

Rear wheel strap for Boa bike mount. Includes one strap.

An easy way to make load up less of a chore, the BoatLoader EVO telescopes out 28" from your roof rack to help get canoes, kayaks, and boards up to the roof. When not in use, it stows neatly inside your RoundBar or CoreBar crossbar, ready and waiting for the next trip to the water. It's easier on your back, your boat and your car's paint job. Product Details - Telescoping boat load-assist arm helps you easily get big boats and boards up to your roof - Protects kayaks, canoes, and your car from dings, scratches and dents - Extends 28" from end of bar for superior clearance and ease of use - Retracts into the bar for instant storage - Corrosion-resistant material provides years of rugged use - Fits Yakima CoreBar and RoundBar crossbars only Product Specs - Weight: 3.80 lbs - Dimensions: L 36.50" x W 3.30" x H 3.00"

Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)