Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Safety

Third Eye Eyeglass Mirror
$13.00
- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount
Third Eye Foam Helmet Mirror
$13.00
The Third Eye Foam Helmet Mirror allows you to see what's coming behind you so you can ride defensively and stay safe on the road. The shatter-proof glass mirror is distortion-free and highly durable. It attaches to the inner or outer rim of almost any helmet with a high-tech product called Dual-Lock.
No Image
$7.00
• Front reflector (white) • Rear reflector (red) • Two wheel reflectors (white) w/spoke attachments
Sunlite HD II Mirror
$20.00
Sunlite's HD II Mirror offers a nice, wide and clear view of what's behind so that you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. It's light and fully adjustable.
Mirrycle Mirrycle Mirror
$25.00
The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter
Mirrycle Original Incredibell
$11.00 - $12.00
Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
Mirrycle Road Mirror
$19.99
The Mirrycle Road Mirror was developed exclusively to fit Shimano STI shifter/brake levers without interfering in any way. The Road Mirror fits almost all the different shift/brake combos. It goes on quickly and easily with the included tools. Just a flick of your eyes allows for a quick view behind. And, it can be attached to either the left or right side lever. Let's be careful out there.
Incredibell Lolo
$12.00 - $14.00
A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters
Incredibell Tower Bell
$7.00
Mounts on handlebars higher than standard bells. Sits close to your fingers and doesn't interfere with other handlebar-mounted devices. - Dome Diameter: 40mm (1.57") - Fits handlebars with 22.2mm (.87-inch) outside diameters
Incredibell Trail Bell
$21.00
Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.
Evo Bugle Horn
$9.00
Fits 22-25.4mm Handlebars
Evo Ringer Compass
$9.00
Fits 22-25.4mm Handlebars
Dimension Safety Flag
$17.99
Dimension Safety Flags offer higher visibility for riders. - Perfect for bikes, trailers, recumbents - Two-piece connecting rod - Assembled Flag Height: 51.75 inches
Delta Classic Bell
$7.00
Clear and Classic Ring Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents. Features - Classic ring - Low profile with clean minimalist design - Thumb spring trigger - Quick Assembly: Easy screwdriver assembly installation on 22.2 mm bar - Alloy dome with molded thermoplastic mounting - Weight: 0.04 lb / 18g
Delta Flexstalk Mirror
$10.00
Features - Construction: Molded thermoplastic with ultra-clear 800R glass lens and backside reflector for added safety - Adjustability: Flexible neck delivers optimum viewing angle - Compatibility: Fits any bar with up to 1" (25.4mm) diameter - Quick Assembly: Tool-free mount with included thumb screw
Delta Helmet Safety Mirror
$10.00
Safety First Just as mirrors are important to your cars, so are bike mirrors important for your bike. Features - Adjustability: Telescoping neck with ball & socket lens for optimum viewing angle - Quick Assembly: Adhesive mount on any helmet - Construction: Molded thermoplastic with ultra-clear 800R glass lens - Weight: 0.03 lb / 12g
Delta Lever Bell
$8.00
Sleek Design Save precious bar space. Features - Classic bell sound - Sleek and unobtrusive design saves precious bar space - Lever action perpendicular to bar - Quick Assembly: Tool-free - strap easily mounts to any size bar 22.2 to 25.4 mm - Alloy dome with molded thermoplastic mounting - Weight: 0.06 lb / 30g
Delta Universal Mirror
$10.00
Rider Safety Safety for every rider is of the utmost importance. Features - Ball & socket for optimum viewing angle - Compatibility: Fits drop and flat bars - Quick Assembly: Bar end mount - Construction: Molded thermoplastic with ultra-clear 800R glass lens - Weight: 0.18 lb / 82g
Timber Timber 3.0 Bolt-On
$20.00
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
Timber Timber 3.0 Quick-Release
$25.00
The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.
Third Eye Handlebar Mirror
$25.00
- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system
Sprintech Drop Bar Rearview Mirror
$17.00
Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!
Pure Cycles PCB Bell
$20.00
Powder-coated black brass bell that produces a loud, clear, and pleasant sound to alert pedestrians. - Split clamp allows the bell to be installed anywhere on the handlebar without removing grips or shifters. - Fits 22.2 to 28.6mm handlebars - Size: 35mm - Material: Brass
Portland Design Works Alexander Graham Bell
$30.00
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - ?Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty
Portland Design Works It's a Bell
$18.00
Every commuter bike needs a good bell, and this is it: It's a Brass Bell. It's small, it's loud, it's not ostentatious, It's a Brass Bell. Greet your friends, alert pedestrians, put a ring on it! - Fits 22.2mm handlebars
Portland Design Works King Of Ding II Bell
$31.00
Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars
Portland Design Works King of Ding II - Coming in Hot
$31.00
Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.
Portland Design Works Saddle Charm
$6.99
Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.
Planet Bike Courtesy Bell
$22.00 - $23.00
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
Planet Bike Courtesy Bell Classic
$31.00 - $32.00
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
Page 1 of 4 Next page